How Often Should I Drain My Hot Tub? The Real Answers by Water-Care System (Salt, FROG, Chlorine, Bromine)
A Dealer’s Answer to the Question Every Owner Asks—Why the Interval Depends on the System, the Manufacturers’ Numbers for Salt, FROG, Chlorine, and Bromine, the Bather-Load Formula, the Six Signs the Water Is Done Before the Calendar Says So, How to Drain and Refill So the New Water Starts Clean, and When Not to Drain in an Idaho Winter
How often you drain a hot tub depends on the water-care system, not the calendar. On a FreshWater® Salt System, properly maintained water lasts up to a full year. On FROG® @ease®, FROG’s guidance is every four months, timed to the mineral cartridge change. On traditional chlorine (dichlor) or bromine, it’s every three to four months—sooner with heavy use, which the standard formula estimates as gallons ÷ 3 ÷ daily bathers = days between drains. Whatever the system, the water tells you when it’s done early: cloudiness that won’t clear, foam, a smell, sanitizer that won’t hold, or total dissolved solids more than about 1,500 ppm above your fill water. Everything you need to drain and refill correctly ships nationwide from our online store.
“Every three months” is the answer most owners have heard, and for a chlorine spa it’s about right. But it’s wrong for a salt-system owner who could go a year, wrong for a FROG owner whose minerals set the schedule, and wrong for anyone whose water went bad in six weeks because of a party and hard fill water. Water doesn’t wear out on a date; it wears out when the things dissolved in it—sanitizer byproducts, stabilizer, minerals, and everything bathers bring—reach the point where the chemistry can’t keep up. Each system reaches that point at a different pace, and that’s what this guide is built around.
The Real Answer by System
| Water-Care System | Drain Interval | What Sets the Limit | Source |
|---|---|---|---|
| FreshWater® Salt System (Hot Spring®, Caldera®) | Up to 12 months with proper maintenance | No stabilizer added; the system recycles salt into chlorine; TDS creeps up from evaporation, top-offs, and chemicals until the water needs a reset. Hot Spring’s own line: it “will keep water clean and clear for a full year” when the spa is properly maintained | Hot Spring FreshWater Salt System FAQ |
| FROG® @ease® (SmartChlor® + minerals) | Every 4 months, when the mineral cartridge is replaced | Low-level chlorine (0.5–1 ppm) and minerals keep demand low, but SmartChlor is a stabilized chlorine, so cyanuric acid accumulates; FROG pairs the drain with the four-month mineral change | FROG @ease care instructions |
| Traditional chlorine (dichlor granules) | Every 3–4 months; sooner with heavy use | Every dose of dichlor adds cyanuric acid that never leaves the water; past about 50 ppm it binds the chlorine. Bather load sets the pace | Industry standard; Jacuzzi® and Hot Spring guidance |
| Bromine (tablets or Reserve & Renew®) | Every 3–4 months | The bromide bank and bromamines accumulate; TDS and bather load set the pace. Not for salt-system spas | Industry standard; Leisure Time Simple Spa Care® |
| Ozone / UV with chlorine (e.g., Sundance CLEARRAY® with dichlor) | Every 3–4 months | Oxidizers cut sanitizer demand, but the dichlor you still add brings cyanuric acid, so the chlorine interval applies | Jacuzzi/Sundance guidance |
The Bather-Load Formula
For chlorine and bromine spas, the rule of thumb used across the industry—Jacuzzi publishes it—is gallons ÷ 3 ÷ average daily bathers = days between drains. A 455-gallon Hot Spring Grandee® with two people in it most nights: 455 ÷ 3 ÷ 2 = about 76 days, or two and a half months. The same spa used by one person twice a week stretches toward the four-month end. It’s an estimate, not a law; the signs below override it in either direction. For a salt-system spa, skip the formula—the system’s design is the whole reason the interval is longer—and judge by the signs and the 12-month ceiling.
It isn’t that salt water is cleaner. It’s that the two things that normally force a drain never get added: the FreshWater Salt System generates chlorine with no cyanuric acid, and it reuses its salt instead of consuming it, so you aren’t pouring stabilized granules into the water three times a week. Keep hardness at 50 ppm, shock with Boost or MPS rather than dichlor, and the water simply doesn’t accumulate what makes chlorine water quit at three months. Undo either habit—repeated dichlor shocks, untreated hard fill water—and the salt spa drifts back toward a chlorine spa’s schedule.
Six Signs the Water Is Done Early
The interval is the outer limit. Drain sooner if you see:
- Cloudiness that won’t clear after a filter clean, a balance, and a shock, and 48 hours of circulation. Our cloudy-water guide walks through everything to try first.
- Foam that keeps returning after defoamer, a shock, and a filter soak—old, saturated water foams easily.
- A smell that comes back within days of shocking. That’s biofilm in the plumbing, and a purge-and-drain is the fix.
- Sanitizer that won’t hold with phosphates and the filter ruled out—on a dichlor spa, test cyanuric acid; over 50–100 ppm means drain.
- A heavy or slick feel to the water, and a persistent film on the shell and pillows.
- High total dissolved solids. The industry trigger is TDS about 1,500 ppm above your fill water’s baseline. On a salt-system spa, remember that the salt itself reads as roughly 1,750 ppm of TDS, so judge by the FreshWater IQ trend (its working target is 1,900–2,500 ppm) or by our free water test rather than the plain 1,500 rule.
How to Drain and Refill So the New Water Starts Clean
Most of what makes new water go bad fast is carried over from the old: biofilm in the plumbing, sediment on the floor, a loaded filter, and untreated fill water. A drain is the one chance to reset all of it. The sequence we use on every start-up:
- Purge the plumbing before you drain. Remove the filter, add a plumbing purge to the old water, and run every jet and air control on high for 20–30 minutes. The gunk that comes out is what would have seeded your new fill.
- Drain completely. Follow your spa’s drain procedure; a submersible pump is faster than the gravity drain. Power off before the water level drops below the jets.
- Vacuum and wipe. Vacuum sediment from the footwell and seats, then wipe the shell with a spa surface cleaner—never household cleaners, which foam for weeks.
- Deep-clean or replace the filter and clean the filter compartment. Pull the pillows and clean them while the shell is empty.
- Refill through a pre-filter on the hose, and—on hard or well water—through a softener. Add a metal sequestrant during the fill if your water carries iron or manganese.
- Treat hardness to your system’s target (25–75 ppm on a salt system; 150–250 on chlorine or bromine).
- Add salt on a salt-system spa (half the chart amount, test, then a cup at a time to 1,750 ppm—see our salt chart), or install the new FROG mineral and SmartChlor cartridges.
- Balance alkalinity, then pH, and shock to 5 ppm (FROG Jump Start® on an @ease spa). Test daily until the water holds 3 ppm, then turn the salt system on or settle into the routine.
- Note the date. Set the next drain on the calendar by your system’s interval, and put the refill supplies on Autoship so they’re on the shelf when it comes.
| Option A: FreshWater | Option B: Leisure Time Spa Care |
|---|---|
| FreshWater Spa Vac • Clean Screen Pre-Filter • FreshWater Filter Cleaner • Stain & Scale Defense • Salt System Start-Up Kit (Vanishing Act, salt, strips, cartridge) or the Maintenance Bundle for a refill • a plumbing purge from our water care collection (Jet Clean works in any spa) | Leisure Time Jet Clean (plumbing purge) • CitraBright shell cleaner and Fast Gloss • Filter Clean • Metal Gon during the fill • Defender once balanced • Renew or Spa 56 to shock • for FROG spas, Jump Start and the @ease cartridges |
Our fill-water guide covers steps five through eight in detail, including the order that keeps metals from turning the new water brown.
Draining in Winter: The Idaho Caveat
A full spa is a well-insulated tank that protects its own plumbing; an empty spa in January is a freeze-damage claim waiting to happen. If your interval lands in deep winter, the rule is simple: drain only when you can refill and reheat the same day, with the fill hose running before the plumbing has a chance to cool, and never leave a spa empty overnight below freezing. Hoses freeze, hose bibs freeze, and a drain that takes two hours in July can take a day in January. Most Idaho owners plan their drains for fall (before the first hard freeze) and spring, and stretch or shorten the interval a few weeks to land there—which the signs above make easy to justify. If the water is truly done mid-winter and you can’t manage a same-day refill, call us; a partial drain-and-refill or a service visit is safer than an empty shell at ten below. Our cold-climate guide covers winter care.
When the water is tired but a full drain isn’t practical—mid-winter, a party next weekend, a hose bib that’s frozen—draining about a third of the water and refilling through the pre-filter knocks TDS, cyanuric acid, and salt back meaningfully without emptying the shell. Rebalance afterward (fresh water shifts pH and alkalinity, and on a salt spa you’ll add back a cup or two of salt). It’s the same move Hot Spring recommends for an over-salted spa, and it can carry chlorine water from a cold snap to a spring drain.
Making Water Last Longer (Whatever the System)
- Treat the fill water—pre-filter, hardness, metals. Clean water in is most of the battle.
- Rinse before you soak and keep spa-only suits; bathers are the biggest source of what wears water out.
- Shock with a non-stabilized oxidizer—MPS, Renew, Boost, or liquid chlorine—so cyanuric acid doesn’t creep up. Save dichlor for small maintenance doses.
- Keep sanitizer in range without gaps; a lapse lets biofilm start, and biofilm forces drains.
- Clean filters on the three-tier schedule and keep a spare set dry and ready.
- Keep the cover on and sealed to limit evaporation, which concentrates everything.
- Test at the 10-day reminder (or let FreshWater IQ watch the trend) so you catch drift before it becomes a drain.
Frequently Asked Questions
How often should I drain my hot tub?
It depends on the water-care system: up to 12 months on a properly maintained FreshWater Salt System, every four months on FROG @ease (timed to the mineral cartridge change), and every three to four months on traditional chlorine or bromine—sooner with heavy use, which the standard formula estimates as gallons ÷ 3 ÷ daily bathers = days. Drain earlier if the water clouds, foams, smells, or won’t hold sanitizer despite good care.
How often do you change the water in a salt water hot tub?
Hot Spring states that with the spa properly maintained, the FreshWater Salt System keeps water clean and clear for a full year. The system adds no cyanuric acid and reuses its salt, so the two things that force a chlorine spa’s three-month drain never build up—provided you keep hardness at 50 ppm and shock with Boost, MPS, or liquid chlorine rather than repeated dichlor. Judge by the signs and the FreshWater IQ TDS trend rather than the calendar.
How often should I drain a hot tub with FROG @ease?
Every four months, per FROG’s care instructions, timed to the four-month replacement of the blue mineral cartridge. SmartChlor holds chlorine at just 0.5–1 ppm, but it’s a stabilized chlorine, so cyanuric acid still accumulates over a fill. Change the water, install fresh mineral and SmartChlor cartridges, and shock with FROG Jump Start at the refill.
What are the signs a hot tub needs to be drained?
Cloudiness that won’t clear after a filter clean, balance, and shock; foam that keeps returning; a smell that comes back within days of shocking; sanitizer that won’t hold with phosphates and the filter ruled out (or cyanuric acid over 50–100 ppm on a dichlor spa); a heavy, slick feel; and total dissolved solids about 1,500 ppm above your fill water. On a salt spa, read TDS against the system’s own baseline rather than the plain 1,500 rule.
Should I drain my hot tub in the winter?
Only if you can refill and reheat the same day. An empty spa below freezing risks plumbing damage, and hoses and hose bibs freeze. Most cold-climate owners schedule drains for fall before the first hard freeze and for spring, stretching or shortening the interval a few weeks to land there. If the water is done mid-winter and a same-day refill isn’t possible, a one-third partial drain-and-refill or a service visit is safer than an empty shell.
Do you ship hot tub drain-and-refill supplies?
Yes. Leisure Time Inc. ships plumbing purge, spa vacs, pre-filters, filter cleaner, FreshWater Salt System start-up kits and maintenance bundles, FROG cartridges and Jump Start, and Leisure Time Spa Care products throughout the contiguous United States, with free shipping on most orders over $99. Orders ship from Idaho Falls, Idaho, typically within 3–7 business days, and the refill set can go on Autoship at your drain interval.
The honest answer to “how often” is “it depends on what’s in the water,” and the system you run decides that more than anything else: a year on salt, four months on FROG, three to four on chlorine or bromine, and sooner whenever the water says so. Drain on the signs, not the superstition; purge, vacuum, and treat the fill so the new water starts clean; and in Idaho, pick a day you can finish. If you’re not sure whether your water is done or just needs a fix, bring a sample to any of our showrooms or send your readings to hello@leisuretimeinc.com—we’ll tell you which, free.
Salt: a year. FROG: four months. Chlorine or bromine: three to four. The water tells you the rest—and the refill ships to your door.
FreshWater Spa Vac: leisuretimeinc.com/products/freshwater-spa-vac
FreshWater Clean Screen Pre-Filter: leisuretimeinc.com/products/freshwater-clean-screen-pre-filter
FreshWater Filter Cleaner: leisuretimeinc.com/products/freshwater-filter-cleaner
FreshWater Salt System Start-Up Kit / Maintenance Bundle: Start-Up Kit | Maintenance Bundle
FROG @ease Cartridges & Jump Start: leisuretimeinc.com/collections/frog
Leisure Time Spa Care (Jet Clean, CitraBright, Metal Gon, Defender): leisuretimeinc.com/collections/leisure-time
Leisure Time Renew: leisuretimeinc.com/products/renew-granular-2-2-lbs
Spa Water Care Collection: leisuretimeinc.com/collections/spa-water-care
Autoship: leisuretimeinc.com/collections/autoship
Idaho Well Water and Your Hot Tub (fill sequence): leisuretimeinc.com/blogs/spas-pools/idaho-well-water-and-your-hot-tub-testing-metals-hardness-phosphates-before-you-fill
How Much Salt Do I Add?: leisuretimeinc.com/blogs/spas-pools/how-much-salt-do-i-add-to-my-hot-tub-gallons-to-cups-chart-freshwater-salt-system
Complete FROG Guide: leisuretimeinc.com/blogs/spas-pools/complete-guide-to-the-frog-system-ease-vs-serene-smartchlor-jump-start
My Hot Tub Won’t Hold Chlorine: leisuretimeinc.com/blogs/spas-pools/my-hot-tub-wont-hold-chlorine-phosphates-cyanuric-acid-and-what-to-do
Best Hot Tubs for Idaho Winters: leisuretimeinc.com/blogs/spas-pools/best-hot-tubs-for-idaho-winters-cold-climate-buyers-guide
Online Store Support: (208) 973-1384 • hello@leisuretimeinc.com

